RVibrake Breakaway System

RVibrake Systems come with a Breakaway System; however, some people tow more than one vehicle or change towed vehicles and need an additional Breakaway System. The Breakaway System is designed to apply the brakes on the towed vehicle in the event the towed vehicle becomes unattached from the motorhome while traveling. The Breakaway System consists of a junction box, wiring harness, and coiled cable.The Breakaway System is the only part of the RVibrake System that requires some installation. The one time installation can take about 25-45 minutes. The junction box mounts on the front bumper of the towed vehicle, and the wiring harness is routed back through the engine compartment and firewall, and then plugs into RVibrake housing. The coiled cable is attached to the pin inside the junction box and to the hitch of the motorhome.If the towed vehicle comes unattached from the motorhome, the coiled cable pulls the pin out of the junction box, causing the RVibrake to push on the brakes of the towed vehicle, bringing it to a stop.